top-section

Oils


Oils

SIL-LUB G.L. 600 Gear Oil

SIL-LUB G.L.600 Gear Oil is a Synthetic industrial grade gear lubricant, formulated from the highest quality diester base fluids, and then blended-compounded with Molybdenum Di-Sulphide (MoS2), a space age self lubricating metallic solids fortifier. Blended in along with MoS2 are an ashless extreme pressure (EP) additive, an anti-foam additive, and an anti leak additive, thus resulting in a true anti-friction, anti-leak, anti-wear, and anti-foam long life synthetic gear lubricant. This new generation gear lubricant is designed to vastly increase production output while decreasing energy consumption and maintenance downtime.

The Molybdenum Di-Sulphide, because of its affinity for metal, is able to establish a super slippery shield for all surfaces, and due to its never draining away completely, will give permanent protection. This “platting” action enables it to absorb tremendous impact loads, reduce temperature, dampen vibrations, reduce noise levels, friction, wear, and effectively extend the life of all lubricated parts. Its “clinging” ability permits quick, low energy start-ups following stops.

 

SIL-LUB G.L.600 Gear Oil will give following benefits:
1) REDUCE POWER & FUEL CONSUMPTION (Minimum of 10%)
2) EXTENDED OIL LIFE: (8 TIME THAT OF PETROLEUM)
3) COOLER OPERATIONS, LOWER NOISE LEVELS
4) EXTENDED MACHINE PARTS LIFE

 

TYPICAL SPECIFICATIONS:

 

Saybolt Viscosity @ 100°F

2000

Kinematics Viscosity @ 100°C

36.3

Viscosity Index, Min.

150

Flash Point

450°F

Fire Point

500°F

Pour Point

0°F

Gravity, API @60°F

33

Colour, Texture

Grey/Black, Tacky

Timken Test : ASTM D-2782 : OK Load Pound

80 pass

Four ball wear test : ASTM-2783
Weld load, Kgs./Load Wear Index, Kgs.

250 / 476